The intermittent high-shear emulsifier series is a high-performance emulsification system. The lower part has a unique stator and rotor structure for strong high shear dispersion and homogeneous emulsification. The middle part has high-speed dispersed blades to assist in dispersion. Qualitative effect, effective control of the flow field, processing more thoroughly. working principle A high shear homogeneous dispersion emulsifier is one that efficiently, rapidly and uniformly distributes one or more phases into another continuous phase, where the phases are generally immiscible. Due to the high tangential speed and high-frequency mechanical effects generated by the high-speed rotation of the rotor, the material is subjected to strong mechanical and hydraulic shear, centrifugal extrusion, liquid layer friction and impact in the narrow gap between the stator and the rotor. The combined effects of tearing and turbulence, so that the incompatible solid phase, liquid phase and gas phase are uniformly and finely dispersed and emulsified under the action of the corresponding mature process and appropriate amount of additives, and finally stabilized after high frequency circulation and reciprocation. High quality products. Equipment classification â—Ž High shear emulsifier: The material is sheared at high speed by the shear force generated by the high speed rotation of the stator and the rotor. â—Ž High-shear dispersing emulsifier: It also disperses the material while shearing the material at high speed. â—Ž High-shear mixing emulsifier: The material is stirred and mixed while shearing the material. â—ŽEmulsifier homogenizer: It plays a homogeneous role while emulsifying the material. â—ŽMobile emulsifier: It is mainly equipped with mobile cranes on the emulsifier according to the needs of some factories. Customers can move and lift the emulsifier according to their own needs. Stator selection â—ŽLong-hole stator head: It is suitable for the rapid pulverization of medium solid particles and the mixing of medium-viscosity liquids. The long holes provide the largest area and good cycle for surface shearing. â—Ž mesh stator head: suitable for low viscosity liquid mixing, its shear rate is the largest, it is most suitable for the preparation of emulsion and the pulverization and dissolution process of small particles in liquid. â—Ž Round-hole stator head: suitable for general mixing or pulverization of large particles. The original opening on this stator head provides the best circulation of all stators and is suitable for processing materials with higher viscosity. Application field Food industry: food coloring, chocolate outerwear, stuffed food, syrup, condiments and various additives; Pharmaceutical industry: ointments, ointments, lotions, creams and various vitamins; Daily chemical industry: shampoo, detergent, cream/paste, toothpaste, paraffin solution, hair dye, etc.; Adhesive industry: rubber solution, polyester sulfide, silicone, hot melt adhesive, polyurethane, etc.
High shear emulsifier product performance and structural characteristics