Powder For Injection,Benzylpenicillin Potassium For Injection,Ceftiofur Sodium For Injection,Poultry Medication Sichuan Aibang Weiye Biological Engineering Co., Ltd. , https://www.aibangpharm.com
Vertical vibration incubator / full temperature shaker technical information
**First, Product Introduction**
The BS-2FD vertical full-temperature culture shaker (oscillator) is a newly introduced laboratory equipment by our company. It is widely used in various fields such as plant science, biology, microbiology, genetics, virology, medicine, environmental protection, food safety, and petrochemical industries. This innovative device features a large internal volume, insulated with high-quality foam material for excellent thermal retention. The unique air circulation system ensures even temperature distribution inside the chamber, while the advanced microcomputer temperature control system offers precise and stable temperature regulation, meeting industry standards.
**Second, Technical Parameters**
1. Dimensions: 1180 × 720 × 700 mm
2. Capacity: 48 × 250 ml or 40 × 500 ml
3. Temperature Control: 5°C to 50°C, with intelligent microcomputer control, ±0.5°C accuracy, and ±1°C fluctuation
4. Motor Power: 400W; Heating Power: 600W; Cooling Power: 268W
5. Oscillation Speed: 0–280 rpm (digital display), Amplitude: 30mm
6. Power Supply: 220V, 50Hz
7. Glass Observation Door with Built-in Lighting System
8. Construction: Powder-coated steel casing, high-quality stainless steel inner lining, one-piece formed stainless steel clamps or universal spring clamps (optional), offering an elegant and professional appearance
**Third, Operating Instructions**
1. Plug in the power cord, turn on the power switch, open the cover, place the container in the appropriate fixture, and then close the cover.
2. Turn on the oscillation switch and adjust the speed to your desired setting.
3. If temperature control is needed, activate the temperature control function and set the required temperature on the controller. For detailed instructions, refer to the temperature controller manual.
4. Before use, ensure that the oscillation speed is set to low and all switches are turned off before powering down the unit.
5. The timer is usually set to the "ON" position (normally open). Adjust it to your desired time if needed. Once the timer finishes, the unit will automatically shut off.
**Fourth, Troubleshooting**
1. If the unit fails to start after turning on the power, check if the power indicator is on. If it is, make sure the oscillation switches are activated and the motor is functioning. If the indicator is off, check the fuse and power connection.
2. If the temperature cannot be controlled, verify that the temperature control switch is on and the controller displays correctly with the right settings.
3. If the light does not work, check if the light switch is on and replace the bulb if necessary.
4. If the issue persists, please contact our company directly. Do not attempt to open or repair the unit yourself.
Weir Suzhou Lab Supplies Co., Ltd. is a leading manufacturer of laboratory equipment based in Jiangsu Province, China. With over 100 products in its range, the company specializes in hot/cold cycle instruments, low-temperature thermostats, constant temperature shakers, incubators, water baths, oil baths, centrifuges, and more. Our products are designed to meet the highest standards of performance and reliability.
For more information, feel free to contact us at +86-512-65554768.
Visit our website or reach out to our customer service team for further assistance.
Next Article
How to choose corn seeds