Tractor throttle six bogey

Tractor throttle six bogey

A repeated avoidance of the accelerator pedal before starting. Since the diesel engine has not yet rotated, the fuel injection pump has not been operated. Repeatedly stepping on the throttle will only increase the wear of the fuel injection pump control device and the oil amount adjustment mechanism, and will not allow diesel fuel to be injected into the cylinder. ?

The second avoids starting the throttle to the maximum position The diesel engine generally adopts the full-standard governor. When the accelerator is stepped on a certain position when starting, the fuel supply adjusting rod is at the maximum fuel supply position. If it continues to increase the throttle, The amount of oil will not change, but the larger the throttle, the higher the speed after starting. However, the temperature of the diesel engine that has just started is low and the lubrication is not enough. The immediate high-speed operation will inevitably increase the wear. ?

Three bogey abrupt throttle When some engine friends use the throttle, suddenly increase or decrease the throttle, which will make the engine speed increase sharply. This will increase the amount of carbon deposits in the combustion chamber, increasing wear, resulting in unstable speed and power reduction.

Four bogey consistent large throttle operation tractor in the job, should be based on changes in the load and road conditions, change the gear and change the throttle to adjust the speed. Some operators consistently use large throttles and never change the throttle position. This not only wastes fuel, but also accelerates the wear of various components. ?

Five avoid the throttle When the horn is used, some of the pilots like to slam the throttle, causing the exhaust pipe to emit a loud and small exhaust sound. When the horn is used to hurry. This will not only speed up machine wear, but may also cause traffic accidents due to unstable hand speeds.

6. Avoid dragging when clutch pedals are not reduced. Some of the pilots do not reduce the throttle in time when they disengage the clutch. This will cause the engine to run under the wide throttle, causing the engine speed to suddenly increase and accelerate the wear of the engine.

ETR Psa Oxygen Generator


With PSA principles, ETR medical PSA Oxygen Generator can produce 93%±3% purity oxygen gas directly from compressed air. Compared with traditional Bulk liquid oxygen and cylinders oxygen, ETR on-site PSA oxygen generator can reduce cost down to 50 percentages. They can produce oxygen by your will, overcoming the limits of distance, location and transportation.

Compressed air is purified through the air dryer and filters to a certain level for main generator to work with. Air buffer is incorporated for smooth supply of compressed air thus to reduce fluctuation of compressed air source. The generator produces oxygen with PSA (pressure swing adsorption) technology, which is a time proven oxygen generation method. Oxygen of desired purity at 93%±3% is delivered to oxygen buffer tank for smooth supply of product gas. Oxygen in buffer tank is maintained at 4bar pressure.

ETR Oxygen Generator




Oxygen Generator

Oxygen Generator,Psa Oxygen Generator,Medical Oxygen Generator,Hospital Oxygen Generator

Hunan Eter Electronic Medical Project Stock Co., Ltd. , https://www.eter-tech.com