Repair agricultural machinery should pay attention to safety and prevent accidents such as crushing, scalding, poisoning, and explosion.
Feed Enzymes preparation is a kind of feed additive which can improve the digestion, utilization, or improvement of animal metabolism to animal feed. As a new type of high efficiency feed additive, enzyme preparation provides an effective way to open up new feed resources, reduce feed production costs, and reduce pollution of livestock and poultry excreta. The compound enzyme preparation is more used in the production of feed industry because of the complexity of feed material structure. A compound enzyme preparation is a product containing 2 or more than 2 single enzymes. Feed enzymes provide guarantee and support for the sustainable development of the feed industry and the breeding industry.
Sunson Group supplys Phytase, Cellulase, Xylanase, Mannanase, Protease, Alpha Amylase, Glucoamylase, Beta glucanase, Complex Enzymes for poultry, swine and ruminants.
Benefits:
Promote the digestion of livestock
This product should be stored in a cool and dry place in sealed container, avoiding insolation, high temperature and damp. The product has been formulated for optimal stability. Extended storage or adverse conditions such as higher temperature or higher humidity may lead to a higher dosage requirement.
Enzyme preparations are proteins, which may induce sensitization and cause allergic type reactions in sensitized individuals. Prolonged contact may cause minor irritation for skin, eyes or nasal mucosa, so any direct contiguity with human body should be avoided. If irritation or allergic response for skin or eyes develops, consult a doctor.
Complex Feed Enzymes,Feed Complex Enzymes,Complex Enzymes For Feed,Animal Feed Complex Enzymes Sunson Industry Group Co., Ltd , https://www.sunsonchinaenzymes.com
One is anti-crush. For agricultural vehicles under repair, the vehicle tires must be fastened with triangular wood. After using the jack to lift the vehicle, it should be reinforced with a support tool. Before loosening the jack, pay attention to whether there are people and obstacles next to it, and check the piping of the hydraulic car. It should be carried out only after the inclined carriage is firmly supported.
The second is anti-scald. The engine in operation should be repaired to prevent burns from hot gas, especially exhaust gas from the exhaust pipe. When the water temperature of the water tank is very high, do not rush to open the water tank cover by hand to prevent it from being scalded by boiling water.
The third is anti-corrosion. When preparing the battery electrolyte, ceramic or glass containers should be used. When checking the electrolyte height and density, do not allow the electrolyte to splash on the clothes or the skin.
The fourth is anti-poisoning. During the repair, it is necessary to frequently start the engine, gas welding and welding operations are frequently performed, and the interior is often flooded with a large amount of exhaust gas. Therefore, air circulation in the repair environment must be maintained to prevent chronic poisoning.
Fifth, prevent explosions. Thoroughly clean the oil tank and oil tank before welding, and confirm that there is no oil gas in the cavity before welding. In addition, Mars should be eliminated from the battery room to prevent the accumulation of hydrogen and oxygen from spilling out of the battery and explode in the event of a spark.
Sixth, prevent fire. There is no open flame when repairing a gasoline engine. No gasoline tanks should be left near the grinder. Cotton yarns, rags, etc., which are tainted with waste oil, should be disposed of in a timely manner and must not be littered.
Seventh is to prevent electric shock. The electrical equipment must be grounded reliably and the switching equipment must be higher than the human head. Wire aging or damage should be replaced in time to prevent electric shock or fire.
Reduce costs of feed
Increase the yield of livestock products
Safety precautions for agricultural machinery maintenance
Prev Article
Is it better to fertilize?