Common faults in components of aquaculture wastewater treatment equipment

After a long period of use of aquaculture wastewater treatment equipment, component failures will inevitably occur. What are the common component failures of aquaculture wastewater treatment equipment? Here are some common faults in the components of aquaculture wastewater treatment equipment:

First, the membrane tube leaks.

Membrane tube leakage of sewage treatment equipment mainly manifests as aging of membrane tube seal and membrane tube damage. The aging of the membrane tube seal is normal and can be replaced. The damage of the membrane tube is mainly caused by human factors. The so-called membrane is only a very thin coating on the surface of the membrane tube channel, which is easily pierced by hard particles such as metal, so the metal hard particles such as rust are tightly entered in the system.

Second, the pump is faulty.

The pump failure of sewage treatment equipment mainly manifests as mechanical seal leakage and motor heating. The faults and treatment methods are detailed in the pump manufacturer's instructions.

Third, the valve is faulty.

The valve failure of sewage treatment equipment mainly manifests as seal leakage. Most of the valve seals are EPDM. In addition to natural work wear, this kind of material avoids metal particles such as rust. The treatment is to replace the new seal.

Fourth, the pipeline system leaks.

Pipeline system due to various acid, alkali and other chemical reagents corrosion and material wear and tear, etc., various flanges, or the aging of the gasket, etc. will lead to leakage of the pipeline system. The treatment method is replacement or repair.

Pain Relief Patch for neck shoulder, lower back and leg.
[Name] Medical Cold Patch
[Package Dimension] 10cm×12cm 2pieces/box
The pain relief patch is composed of three layers, namely, backing lining, middle gel and protective film. It is free from pharmacological, immunological or metabolic ingredients.
[Scope of Application] For cold physiotherapy, closed soft tissue only.
[Indications]
The patches give fast acting pain relief for strains, sprains, cramp, bruises, swollen areas or joint stiffness.
[How To Use a Patch]
Tear off the packaging bag and remove the patch. Remove the protective film and apply the patch on the skin. One piece, one time. The curing effect of each piece can last for 8-12 hours.
[Attention]
Do not apply the patch on the problematic skin, such as wounds, eczema, dermatitis,or in the eyes. People allergic to herbs and the pregnant are advised not to use the medication. If swelling or irritation occurs, please stop using and if any of these effects persist or worsen.notify your doctor or pharmacist promptly. Children using the patch must be supervised by adults.
[Storage Conditions]
 Store below 30c in a dry place away from heat and direct sunlight.

Pain Relief Patch For Neck Shoulder,Lower Back And Leg

Pain Relief Patch,Pain Relief Pad,Pain Relief Plaster,Neck Pain Relief Patch,Back Pain Relief Pacth

Shandong XiJieYiTong International Trade Co.,Ltd. , http://www.xjplaster.com