The working principle of the liquid filling machine is to control the flow of the material by pulling a piston through the cylinder to extract and punch the material. The reed can be adjusted by the reed switch to control the stroke of the cylinder. The liquid filling machine is based on the series of filling machines produced by our company. It introduces foreign advanced filling machine technology and carries out further transformation and innovation. Its structure is more simple and reasonable, the precision is high, the operation is more convenient, it is expensive. The company is ideal for filling high-tech.
First, use, maintenance and installation
1. Because the filling machine is an automatic machine, the size of the easy-open bottle, bottle mat and cap are required to be uniform.
2. Before driving, you must first use the rocker to turn the machine to see if it is abnormal. It is true that you can drive again.
3. When adjusting the machine, the tool should be used properly. It is strictly forbidden to use excessive tools or excessive force to remove the parts to avoid damage to the machine or affect the performance of the machine.
4. When the machine is adjusted, be sure to tighten the loose screws. Rotate the machine with the rocker to see if the motion meets the requirements before driving.
5. The machine must be kept clean. It is strictly forbidden to have oil, liquid or glass debris on the machine to avoid damage to the machine. Therefore, it must:
(1) In the production process, the machine removes the liquid medicine or glass debris in time.
(2) Before the shift, the surface of the machine should be cleaned once and clean lubricating oil should be added to each activity department.
(3), should be scrubbed once a week, especially in places that are not easy to clean in normal use or cleaned with compressed air.
Second, the installation notes
1. After the machine is out of the box, first check whether the random technical data is complete, and whether the machine is damaged during transportation, so as to solve it in time.
2. Install and adjust the feeding assembly and the discharging assembly according to the outline drawing in this manual.
3. Add new lubricant to each lubrication point.
4. Turn the machine with the rocker to check if the machine is running in the right direction (counterclockwise in the direction of the motor shaft). The machine must be protected from grounding.
The flow of the liquid filling machine is generally as follows: the boxes with empty bottles are stacked on the tray, and the conveyor belt is sent to the unloading tray machine, the trays are unloaded one by one, and the boxes are sent to the unloading machine with the conveyor belt, and the empty bottles are removed from the conveyor. The box is taken out, and the empty box is sent to the washing machine through the conveyor belt, cleaned, and then transported to the side of the boxer to fill the bottle containing the beverage. The empty bottle taken out from the unloader is sent to the bottle washer for disinfection and cleaning by another conveyor belt. It is inspected by the bottle inspection machine and enters the filling machine and the capping machine after meeting the cleaning standards. The beverage is filled into the bottle by a filling machine. The bottle with the beverage is sealed by the capping machine and transported to the labeling machine for labeling. After the label is attached, it is sent to the packing machine and then sent to the stacking tray machine and stacked on the tray to be sent to the warehouse.
Liquid filling machine operation and precautions