The oven is widely used: it is suitable for baking baked goods with chemical gas and food processing industry, removal of substrate stress, curing of ink, drying of paint film, etc. The oven is also suitable for drying the motor or transformer coil after dipping or similar baking. Widely used in electronics, motors, telecommunications, electroplating, plastics, hardware chemicals, food, printing, pharmaceutical, PC board, powder, impregnation, spraying, glass, ceramics, wood building materials. Such as precision baking, drying, tempering, preheating, shaping, processing and so on. Buying the machine you need requires care, and using your own machinery requires more care. Only by learning to maintain it can its performance be maximized. Xinda explains the maintenance method of electric oven: 1. Clean the surface and studio dust to keep the machine clean and hygienic. 2. Regularly check whether the fan is running normally, if there is any abnormal sound, if the machine is turned off immediately. 3. Check the vents regularly for blockage and regularly clean up the dust. 4. Check the temperature controller regularly for accuracy. If it is not accurate, please adjust the static compensation or sensor correction value of the temperature controller. 5. Check the heating pipe regularly for damage and whether the line is aging. 6. Sudden power failure, the power switch and heating switch should be turned off to prevent automatic start when incoming calls. The maintenance of the oven is a very careful process, we must be as careful as the child, so that is the producer of wisdom. Learn to maintain machinery and use it for a long time.
Direction of use and maintenance of the oven in production