How to extend the life of agricultural machinery

There are many difficulties in the maintenance of agricultural machinery, namely: difficult to check, difficult to unload, difficult to install, difficult to repair, etc., to strengthen the management of clever processing can extend the life of the machine, reduce costs.

First, check the crack

Put suspicious machine parts in kerosene and soak for 30 minutes, remove the dry surface, and apply a layer of chalk and ash on the surface. After some time, the chalk ash absorbs the kerosene that has leaked from the cracks and cracks. Black, you can find parts of the crack.

Second, remove and remove the tires

First remove the rust from the rim, apply a thin layer of talc between the inner and outer tires, then lay the rim flat and put the tire on. Use a pedal or crowbar to pry the rim of the tire into the rim, insert the inner tube, and use the wire to fix the inflation valve in the rim inflation valve hole, and then install the other side of the tire. Starting from the corresponding position of the inflation valve, use a crowbar to push a part of the tire into the rim first, and then gradually install the tire from the inflation valve to both sides. At the same time, press the tread with the foot against the position of the inflation valve, and then step on the edge to make the tire The part of the traveler gradually fits into the rim.

The tires are used for a long time, and the tires are easily rusted on the rims and it is difficult to remove them. You can first remove the tire together with the steel ring, place it on the ground, sprinkle water on the inner ring of the tire, and then hit the circumference of the inner ring of the tire with a hammer, tap the edge and sprinkle water, knock on a few hammers, and then the water will It will penetrate into the rust-sticking area and the tire can be easily removed.

Third, the crankshaft oil seal

Roll a clean, thin stiff paper into a trumpet roll. Place the roll on the shaft. Place the small end of the roll on the shaft end. Put the oil seal on the small end of the roll. Gently seal the oil seal to the shaft. The top precession, the direction of rotation is consistent with the direction of reel rotation, when the seal is in place, slowly withdraw from the reel.

Electric Under Blanket is a specific type of Electric Blanket, usually used in European countries. It is placed below the bottom bed sheet, but cannot be above the bed sheet or over human body.

It normally has 3 to 4 heat settings as option. Consumers can choose their suitable temperature ranges.

Electric under blanket is normally used for sleeping, hence it normally shut off after 12 hours, or be turned off manually.

Below image as reference:

Electric Under Blanket

Electric Under Blankets, Heated Under Blanket, Electric Heated Blanket, Electric Blanket Safety

Ningbo JustLive Electrical Appliance Co., Ltd , https://www.makeheat.net