Method for domesticating fish to eat on stage

Method for domesticating fish to eat on stage

With the continuous development of fish farming technology, the method of raising fish with full-priced pellet feed has gradually been applied. However, due to the fact that many fish farmers are not allowed to feed and acclimate, the late arrival of the fish on the stage (the time of the fish to the vicinity of the spreading table) will not only affect the feeding and delay growth, but also increase the cost and affect the efficiency of raising fish. Here are two simple and easy domestication methods that we have summarized in our production practice.
1. The feed bag domestication method uses large-eye screens (appropriate for leak-proof materials). It can be used as a hanging bag that can hold 1.5 to 2 kg of feed. The bag contains 1 to 1.5 kilograms of full-price pellet feed and will be filled with feed. The hanging bag is hung in front of the bait station to make it absorb water and allow the fish to feed freely. At the same time, a small amount of the same feed is slowly scattered near the bag to attract fish to eat. This timing, domestication, 2 to 3 days of fish can cluster to grab food, and then remove the hanging bag.
2. Light trapping and domestication method This method uses the tendency of the fish to light, and when it starts to acclimate, it is equipped with a 1 to 60-watt incandescent light bulb (preferably a waterproof cover), which is hung in front of the bait station at night. About 0.7 meters above the surface of the water, when it is found that there is a fish swimming, a few grains of grain are sprinkled with full-priced feed in the water, gradually attracting groups of fish to catch food. So every 2 to 3 times, spread time gradually shift to the day, 2 to 3 days after the fish can cluster to take the food, and then cancel the lighting.

Hollow type Creled 5500M mobile LED Operating Light. The service life of LED shadowless lamp is long (50,000h), far longer than that of traditional tungsten halogen lamp (1,500h), and it is over twenty times of the service life of energy saving lamp. Mobile LED Operating Lamp no welding titanium alloy arm and the streamline-designed lamp cap better meet the design requirements of modern clean laminar flow operation rooms. Its fashionable appearance provides a new attraction for hospital operation rooms.Mobile LED Operating Lamp with real "cold" light source: Using LED as the light source. No worry about the heat of operation area and head.

hollow type operating light

Hollow Mobile OT Lamp

Hollow Mobile OT Lamp,Battery OT LED Light,Dental Operating LED Light,Mobile Surgery Room Light

Shandong Lewin Medical Equipment Co., Ltd. , https://www.operatinglight.nl