It provides antioxidant defense against free-radical damage, reduces inflammation, and holds in moisture.
Veterinary Drug,Hyaluronic Acid Powder,Oxytoci Acetate,Dmaa Powder Shaanxi YXchuang Biotechnology Co., Ltd , https://www.peptidenootropic.com
First, the nozzle cleaning 1, software cleaning: automatic cleaning through the maintenance function in the printer driver;
2. Ink cleaning: When the ink car is in the initial position, use the syringe to connect the hose to the waste ink tube and draw about 5 ml of ink. Do not rebound the inner cylinder of the syringe, which will cause color mixing of each nozzle. In the process of ink extraction, if the nozzle is not tightly sealed, the ink can be lightly moved by hand to ensure a good seal of the nozzle and the nozzle protector. After the ink is pumped, the software is cleaned.
3. Flushing and cleaning: remove the ink cart, remove the ink bag, connect the syringe with the cleaning liquid to the ink column of the nozzle, push and withdraw with appropriate pressure, and spray the complete thin wire vertically to the nozzle.
4, print cleaning: replace the ink with the nozzle phenomenon by using the "head cleaning agent", use the vector graphics software to print the color block of the color, to clear the nozzle blockage phenomenon, and then switch back to the original ink.
Second, the nozzle maintenance If the nozzle has been used for a long time idle, you need to carry out professional maintenance methods and steps:
1. Remove the nozzle from the printer in the correct way and clean the residual ink stains;
2. Thoroughly clean the nozzle with the nozzle cleaning agent;
3. Injecting special nozzle maintenance agent into each ink column of the nozzle;
Introduction to the maintenance of the printer nozzle
If the nozzle is plugged, the nozzle needs to be cleaned. Methods as below:
Next Article
Grape management machine saves time and efficiency