Disposable Surgical Cap,Disposable Bouffant Cap,Surgical Cap With Ties,Blue Surgical Cap Ningbo Carest Medical Instrument Co.,ltd , https://www.carestmed.com
1. The host is in place: the level and weight of the host must meet the drawing requirements when it is in place.
2. Sub-component installation should be carried out from bottom to top.
3, rail or catenary, roller type should be caused by the inside of the device.
4. Partial pre-test should be carried out during the test run, and then all running after normal operation.
The operator's precautions during the operation of the equipment:
1, must pay attention to its electrical panel display is normal.
2. All personnel entering the blasting room must wear goggles and a safety helmet.
3. The operator must check the equipment every day.
These include: lubrication and mechanical parts. Lubrication parts such as: reducer, hydraulic, oil mist and bearing chain. Mechanical parts such as: wear parts of the rotating parts, wearing parts of the wearing parts.
Example: If the blasting machine has vibration, it must stop immediately to replace the blade; register the wear and tear every day, and replace the wearing parts in time.
4, the lubrication part should ensure timely refueling.
5. The directional sleeve must be adjusted and replaced in time.
6. Check if the amount of steel shots is sufficient every day.
About the installation and operation of the shot blasting machine
Precautions for the shot blasting machine during the installation process: