Most of our products are made from our Organic Goji Berry Juice. That's why we are the only company can produce organic Goji Berry Juice Concentrate. We can control all the process lines from planting the goji berry fruit, picking up the fruit to producing the Goji Juice . Since 1997, we have changed our equipment for 4 times. We always keep the latest production ideas, strive to bring the most perfect products to our customers.
By comparing major nutrients of goji raw juice and Goji Juice Concentrate, we found that the nutrients of Goji juice concentrate are 3 times of Goji juice. The technique is scientific and quality stable and nutrients and active ingredients in particular do not lose. From the production and sales in the past two years, the shelf life can be as long as 18 months and products conform to clients` requirements. It is cost-saving for producing Goji powder or other uses. By adding 2 times of pure water and after high pressure and homogenization, it can be restored to the original state.
Appearance
1) Color: Red or deep red.
1) Brix(%): ≥36.0
NO
ZHONGNING, NINGXIA, CHINA
1) Inner package is 200kgs aseptic bag, outer package is opening steel drum.
Should be stored at room temperature in clean, cool, dry warehouse, prevent sun, rain, and not be stored with corrosive, toxic, and smelly item. With these conditions, product shelf life is 18 months. (suggestion: 5-8℃). Organic Goji Juice Concentrate (Brix 36%) Organic Goji Juice Concentrate (Brix 36%),Organic Goji Berry Acai Juice,Top Grade Goji Berry Juice Concentrate,Organic Goji Berry Concentrated Juice Ningxia Qixiang Biologic Foodstuff Co., Ltd. , http://www.qxgoji.com
2) Taste & Odor: Fresh Goji Berry Juice concentrate taste and smell, no peculiar smell.
3) Histomorphology: Turbid liquid with pulp, allowing the pulp precipitation phenomenon after completely standing.
4) Impurity: No visible foreign impurities
Physics & Chemical Specification
2) Total Acid(g/100mLas Citric Acid): ≥0.8
3) pH: 3.5-4.1
Microorganism Specification
1) TPC (CFU/mL): ≤100
2) Yeast (CFU/mL): ≤100
3) Mould (CFU/mL): ≤10
4) Coliform (CFU/mL): ≤10
Additive
Country of Origin
Package
2) Inner package is 25kgs aseptic bag, outer package is opening steel drum.
Storage
Easy way to remove rust dead and broken screws
When working with a farm machine, it is common to see rusted or broken screws. Some robots are helpless, and some are screwed and damaged to damage the screws and parts. Here are a few easy ways to try it out, which may bring you benefits: 1. Remove the rusted screws and nuts 1. Slowly tighten the rusted nut by 1/4 turn, and then withdraw. Repeatedly tightening. Can be screwed out. 2. Tap the screw or nut with the hand hammer to make the rust layer easy to unscrew. Take care not to deform the head of the screw. 3. Use kerosene to soak the screw for 30 minutes and unscrew it. 4. Use a torch to heat the nut, so that the nut is heated and expanded and quickly unscrewed. 5. Use a "wrench" to soak the screw with this liquid and easily unscrew it. Second, the demolition screw method 1, if the screw section is higher than the surface of the part, the hacksaw saw slot can be used, and then depending on the size of the screw with a screwdriver and so on. You can also find a nut with a similar diameter to the broken head screw, set it on the broken end, and screw the nut from the inside of the nut into one and use a wrench to unscrew it. 2. When the cross-section of the screw is flush with or lower than the plane of the part, a hole can be drilled on the broken screw and drilled with a hardened steel nail with a square section and twisted with a wrench. It is also possible to use electric welding to gradually increase the end of the broken pile. When the nut is welded above the plane, use a spanner to unscrew the nut, or use a drill to drill the screw and tap the thread to increase the screw hole.
Next Article
Feeding compound feeds must be "four to four taboos"
Prev Article
Eel breeding